How Much Do Staffing Agencies Charge Companies? Fee Examples

How Much Do Staffing Agencies Charge Companies? Fee Examples
A warehouse manager budgets $24 an hour for an associate. The staffing quote comes back at $36. Which number should finance approve? In this example, $24 is the worker’s gross hourly pay and $36 is the agency’s charge for each regular hour. How much do staffing agencies charge companies for a permanent hire?
A recruiter charging 20% of an $80,000 salary would earn a $16,000 placement fee. These figures are illustrative. To budget for your opening, use the calculation that matches the service you plan to buy, then check which hours, expenses, or hiring decisions could change the final invoice.
1. How much do companies pay for staffing services?
Companies typically pay an hourly bill rate for temporary staffing, a placement fee for a direct hire, or assignment charges plus any applicable fee when they hire an agency worker directly. The first detail to look for besides any percentage is the amount the agency applies it to.
1.1 What do agencies actually publish?
Frontline Source Group advertises a 50%–85% markup for temporary and contract staffing, depending on skill level and contract duration.
That percentage applies to hourly pay. At an illustrative $24 per hour, those endpoints translate to $36 and $44.40 per billable hour. A buyer still needs the rate for the particular assignment. Frontline Source Group pricing
For direct hires, 4 Corner Resources advertises 18%–25% of guaranteed first-year compensation under its installment options. Its published schedule pairs 18% with three months, 21% with six months, and 25% with twelve months.
The firm says it bills after each completed 30-day period and stops future payments if the employee leaves. These are the providers’ own advertised terms, checked November 15, 2026. 4 Corner Resources pricing
1.2 Which number should go in the hiring budget?
- Temporary staffing. Multiply the quoted bill rate by expected hours for each worker. Add premiums and separate charges that apply to the order.
- Direct hire. Apply the quoted percentage to the compensation named in the agreement, or enter the agreed flat fee. Budget for employee compensation separately.
- Contract-to-hire. Add assignment invoices through the planned conversion date and the fee due on that date. Budget for wages and benefits on your payroll from the direct start date.
Ask the hiring manager to confirm the schedule before finance approves a total.
A quote for one associate may be accurate to the penny while the warehouse actually needs coverage on two shifts. Enter the number of people and hours needed on each. Price any planned overlap between incoming and outgoing shifts, too.
2. What does a temporary staffing agency charge per hour?
2.1 Build the bill rate from the worker’s pay rate
Bill rate = hourly pay rate × (1 + markup as a decimal). At $24 in straight-time pay and a 50% markup, the calculation is $24 × 1.50 = $36 per billable hour. If the agency has supplied that rate, use it when estimating your invoice.
The worker earns $24 in gross pay for one regular hour. The employer pays the agency $36 for that hour. The $12 difference can fund employer payroll taxes, insurance, recruiting, timekeeping, and other operating costs. The remainder after expenses contributes to agency earnings.
Ask which expenses the proposal includes and which the agreement allows the agency to bill separately.
A practical question for the account manager is whether a new starter at the same wage would generate the same first invoice as someone already working on the order.
Sometimes the first quote you receive gives only the markup. Ask the recruiter to put the proposed wage beside it.
At the same 50% markup, raising starting pay from $24 to $26 changes the bill rate from $36 to $39. That extra $3 an hour adds $720 across 240 hours for one associate. This is the budget effect of changing the pay assumption while holding the schedule constant. Bluebix temporary staffing services
2.2 Scale one hourly rate into a weekly or assignment budget
For the warehouse manager, a weekly estimate is easy to check against the shift roster. Suppose every associate works 40 straight-time hours each week and the $36 rate covers every planned charge.
- One associate for one week. Multiply 40 hours by $36 for a $1,440 invoice estimate.
- One associate for six weeks. Multiply $1,440 by six for $8,640 across 240 hours.
- Three associates for six weeks. Multiply $8,640 by three for $25,920 across 720 hours.
Within the one-worker estimate, 240 hours at $24 account for $5,760 in gross wages. The other $2,880 is the hourly spread multiplied by 240. Those amounts add up to the $8,640 you have already budgeted. Adding a separate wage line to that purchase order would count the same wages twice.
If one of the three associates starts a week later, remove 40 hours from the forecast. At $36 per hour, that change reduces expected charges by $1,440, assuming the order has no minimum.
2.2.1 What does a 50% markup mean for agency profit?
The denominator explains why two people can look at the same invoice and report different percentages. Divide the $12 spread by $24 in pay, and you get a 50% markup. Divide $12 by $36 in revenue, and you get 33.3% of revenue before employer costs.
To calculate gross margin, the agency subtracts its applicable direct labor costs from revenue and divides the result by revenue. Employer costs beyond wages can reduce that margin. Net profit also depends on operating expenses.
A buyer with only the pay and bill rates can calculate the spread and markup precisely. The agency’s expense figures would be needed to calculate what it earns.
2.3 What changes if the team works overtime?
Use the overtime bill rate in your agreement. Suppose one associate works 40 regular hours at $36 and four overtime hours at an agreed $54. The regular line is $1,440. The overtime line adds $216, bringing the weekly estimate to $1,656.
Here, $54 is a hypothetical price the client agreed to pay the agency. The worker’s overtime pay follows applicable payroll rules. Ask how the two rates will appear on the invoice and who can authorize extra hours when a shift runs long.
3. How much is a direct-hire placement fee?
3.1 Calculate the fee on the agreed compensation
Placement fee = agreed compensation × fee rate. If an agency charges 20% of an $80,000 base salary, the employer pays the recruiter $16,000. The employee receives the salary through the employer’s normal payroll. The placement fee is a separate recruiting expense. Bluebix direct hire staffing services
What happens if the offer also includes a $5,000 guaranteed bonus? If the agreement counts that bonus, the fee basis becomes $85,000 and the fee rises to $17,000.
If the agreement specifies base salary alone, the calculation stays at $16,000. That single definition changes the invoice by $1,000 even though the agreed percentage and the candidate’s offer stay the same.
Have the recruiter show the calculation using the final offer. Check how the agreement treats guaranteed payments, discretionary incentives, commissions, and allowances when those appear in the package.
Keep the approved calculation with the purchase order so accounts payable can match the invoice to the right salary figure. When a salary changes during negotiations, ask for a revised fee before the offer goes out. The hiring manager can then secure approval for both increases together.
3.2 Find out when payment is earned and due
Read the agreement for four events. When does the candidate accept? When do they start? What event earns the agency its fee? When is payment due after invoicing? A candidate might accept in November and start in January, which can put the invoice and the cash payment in different budget periods.
Ask what happens if the candidate withdraws before starting or leaves early. If the agreement provides a remedy, record whether it offers a replacement search, a credit, or a refund.
Check eligibility, the time window, and the notice deadline. Give the manager a contact who can receive notice if the terms require it. Send the offer and start dates to finance once the candidate confirms each one.
3.3 How do flat fees and retained searches work?
A flat fee sets a dollar price for the recruiting work described. Check how many positions it covers, which search activities are included, and how the agency bills expenses.
A retained search can involve payments as the search progresses. Suppose the parties agree to $18,000 in three $6,000 installments, each credited toward the total.
Ask which milestone triggers each payment, whether any reimbursable expenses sit outside that total, and what remains payable if you close the search. Finance can then assign a due date to each installment and the hiring manager can see what work the agency commits to at that stage.
4. What does contract-to-hire cost if you keep the worker?
4.1 Calculate the hourly phase and the conversion fee
Start a new example with one worker at $36 per regular hour for 12 weeks. At 40 hours per week, the agency bills 480 hours. Multiply 480 by $36 for $17,280 in assignment charges.
Assume the agreement specifies a $2,500 fee if your company hires the worker directly at that point. Your agency charges through conversion total $19,780.
For a full-year budget, add the cost of employing the person directly from the new start date through the end of your planning period.
Ask payroll for the expected wages, employer costs, and benefits for those weeks. Use the worker’s final agency timesheet to establish where the assignment ends, and your payroll begins. Bluebix contract-to-hire options
4.2 Check how many hours count toward conversion
A week on the calendar and a week of qualifying hours can give different results. If your estimate assumes 40 hours and the employee works 32, the difference may affect a fee based on hours. A missing timesheet can have the same effect when only approved hours count.
Reconcile time through the final shift and ask the agency to confirm any credit in writing before issuing an offer with a firm start date. Ask how the agreement treats overtime, paid holidays, missed shifts, and previously completed assignments.
For example, 4 Corner Resources says its conversion charge declines as the worker logs more hours and can reach zero once the requirement in the agreement is met. Request the dollar amount for your proposed date, the hours credited so far, the remaining hours, and the person authorized to approve the move. 4 Corner Resources conversion terms
4.3 Should you wait for a fee to decrease?
Compare the cost of employing the same person for the same additional weeks. Suppose, in a further hypothetical example, the agency would reduce the $2,500 fee to $2,000 after 80 more hours.
Waiting buys those hours for $2,880 at $36 per hour, then adds the $2,000 fee. Total additional spending is $4,880.
Converting now would cost the $2,500 fee plus the cost of direct employment over those 80 hours. If payroll estimates $30 per hour including employer costs, that path totals $4,900. Waiting saves just $20 under these assumptions.
The quoted fee falls by $500, but the extra agency hours cost $480 more than the same hours on payroll.
At that point, the candidate’s willingness to wait may matter more than the small price difference. Confirm an approved offer, an agreed start date, and the candidate’s acceptance before scheduling the payroll change.
5. Why can the same job title produce different quotes?
5.1 What changes the pay rate?
“Forklift operator” leaves a recruiter with several pay decisions. Someone driving a sit-down forklift on a daytime loading dock may need different experience from someone using a reach truck on a freezer shift.
Specify the worksite, shift, equipment, required credentials or training, start date, and schedule. The local pool of people able to take that assignment helps determine what wage the agency proposes.
Explain which details you can change. Perhaps the warehouse can move the start time to coincide with local transit, but needs the same equipment experience on every shift. Ask the recruiter which assumption shaped its pay recommendation.
If the agency proposes a shift premium, get the dollar amount and find out whether its quoted wage already includes it.
5.2 What changes the agency’s charge?
Take two hypothetical forklift assignments that both pay $24 per hour. One site supplies equipment and has a supervisor available for site orientation and training.
The other asks the agency to arrange an additional screening step and send a coordinator for a night shift launch. An identical wage can produce different quotes when one provider has more work to cover.
Describe the working conditions and ask how any differences in insurance costs, screening, or on-site support affect the rate. Confirm who supplies each service and whether the price covers each start or the entire order. The two sites may also make different commitments about duration or hiring volume.
When a supplier offers a volume rate, ask what happens if the order shrinks. For example, a rate based on ten planned starts may depend on ten people actually starting or on a minimum number of billed hours.
Write that condition beside the rate so the operations team can see the budget effect before changing the schedule. Check whether starts across different sites count toward the same commitment during that period.
6. Which charges can change the final invoice?
6.1 Premiums, minimum hours, and schedule changes
Ask for the bill rate for each shift you expect to run, including nights, holidays, and overtime. If the agency quotes a night rate, ask how it handles a night shift that also qualifies for overtime. Get the amount for that combination before estimating the week.
Check short shifts and cancellations as well. A two-hour callout might carry a four-hour billing minimum under a particular agreement.
If so, dispatching one person for two hours could cost four times the hourly rate. Record the notice required to cancel a shift, the charge for late cancellation, and the person authorized to approve additional hours.
6.2 Screening, equipment, and pass-through expenses
A proposal might include a standard background check and bill separately for a client-requested test. Ask which tests, equipment, travel, or other expenses you are buying, who approves them, and whether the agency adds a handling charge. Confirm applicable taxes and what portion of the invoice they apply to for your order.
For a pass-through expense, ask for the original receipt and the agreed reimbursement limit. A supervisor approving travel should know whether mileage, parking, and overnight stays fall within the authorization.
For each extra, capture the unit beside the amount. A $160 charge per worker, per order, and per week produces three different budgets. Ask what triggers it if a candidate completes screening and withdraws before starting.
This detail matters when the number of applicants screened exceeds the number who report for work.
6.3 What should accounts payable verify?
Match the worker, work date, hours, shift, rate category, and purchase order against the approved timesheet and rate sheet. Reconcile one-time charges separately, with receipts or other support where the agreement calls for it. Carry forward any credits with a reference to the invoice they correct.
Suppose the contract bills $160 separately for screening each worker who starts. Three starts produce a $480 charge.
If the same line appears the next week, ask which new starts generated it. Where the same three names appear twice, accounts payable can identify the charge in question and request a correction before closing the order. Track the credit through the next statement if the supplier issues it later.
7. How do you compare two staffing quotes on the same terms?
7.1 Give both agencies the same assignment
Send each agency the same job duties, site, shift, worker count, wage assumption, screening requirements, expected hours, and assignment dates.
Ask for regular and overtime bill rates, included services, one-time fees, and an estimated total. Tell each supplier whether the firm end date or the number of hours is more certain.
Read the service descriptions beside the numbers. For example, one agency might include a coordinator on the first shift while the other expects your supervisor to meet the crew. Operations can estimate the supervisor time involved.
If one proposal assumes a lower wage, ask both agencies to quote again using the pay your hiring manager has approved. Bluebix guide to choosing a staffing agency
7.2 Find the point where the lower hourly rate saves money
Consider a fresh example with one worker, the same pay, the same screening service, and straight-time hours throughout. Quote A charges $36 per hour plus a $480 one-time charge for this order. Quote B includes the same service in its $36.75 hourly rate. The $480 here is the price of one service package for this one-worker proposal.
At 480 hours, Quote B costs $120 less. Quote A totals $17,760 once you add $480 to its $17,280 hourly charges. Quote B totals $17,640. The lower hourly rate becomes attractive only when enough hours accumulate to recover the upfront charge.
Each additional hour saves $0.75 with A. Divide the $480 one-time charge by $0.75 and the two quotes break even at 640 hours. Both then cost $23,520. Below 640 hours, B costs less. Above 640 hours, A costs less as long as the quoted terms hold.
Turn that number back into a scheduling decision. At 40 hours a week, the prices meet at week 16. If the job ends after week 12, budget for the shorter run. If an extension is likely, request both totals for a longer run too. Confirm that the one-time fee stays the same and that the supplier will honor the rate over the extension.
At 800 hours, A would total $29,280 and B would total $29,400. The advantage switches to A by $120. A manager with a credible end date can now explain which proposal fits the order.
7.3 A staffing quote request you can copy
Please quote [number of workers] for [role, location, and shift] at [expected hours per worker per week] for [duration]. Please show the pay assumption, regular and overtime bill rates, one-time charges, and estimated assignment total. If we hire someone permanently after [hours or date], what additional fee would apply?
Attach the job description and state any required tests, shift premiums, and known start dates. Ask the supplier to mark assumptions beside each amount. That gives procurement a written basis for approval if the business later needs a second shift or a different end date.
8. FAQs about staffing agency fees
Can I calculate the markup from a pay rate and bill rate?
Markup equals (bill rate minus pay rate) divided by pay rate, multiplied by 100. At $36 billed and $24 paid, the result is 50%. Use two figures that cover the same worker, shift, and pay category. A night differential included in only one figure would distort the percentage you calculate.
Do I add the worker’s wages to the agency invoice?
The all-in hourly bill rate in the agency-payroll model already includes the worker’s gross wages. Enter approved hours times the applicable rate, then add agreed extras. If finance also tracks the wage component for analysis, label it as part of the invoice total so it appears only once in spending.
Do we owe a fee if we interview candidates but hire nobody?
The agreement’s fee trigger determines what you owe. A contingent search may require a completed hire before a placement charge applies. A retained search may earn an installment when work begins. Check separately for approved advertising, assessments, or cancellation costs that become payable even when the position ultimately stays open.
Does the agency charge for every person we hire?
Check whether the price applies per placement, billable hour, search, or group of openings. A direct-hire agreement might charge for each candidate placed. A flat-fee search could cover a specified number of roles. Ask how the price changes if you hire two candidates from the same shortlist for different vacancies.
Can companies negotiate staffing fees?
Ask for revised terms based on committed hours, hiring volume, payment timing, or recruiting scope. Have the supplier show the total under your original assumptions and the revised order. Record any minimum commitment and the services included. A discount tied to more hours helps only if you need those hours.
Conclusion
The warehouse manager can put a number beside the schedule. At $36 per straight-time hour, one associate costs $8,640 for six 40-hour weeks.
Three associates on that schedule cost $25,920 before any agreed extras. Give finance the expected headcount, hours, premiums, and one-time charges alongside that figure.
If a permanent hire is possible, include the conversion date and the fee the agency confirms for that date. Those details give the supervisor a spending limit and accounts payable a way to check the first invoice.
Share your role, location, headcount, and expected hours to request a staffing quote from Bluebix Inc.
About the Author
BluebixInc Editorial Team
Staffing insights and workforce solutions for employers.
